Granges
Slate dial, sandblasted to 180 µm and lacquered once. No seconds hand, because the fourth wheel bridge is what lets the case stay at 9.80 mm.
- CaseSteel, brushed flanks
- Height9.80 mm
- Made in 202628
- Wait14 months
Every watch here carries the same calibre, the same crystal and the same 19 mm lugs. What separates them is the dial, the case material and 1.40 millimetres of height — so that is what this page measures, and nothing else.
A watch is bought on the wrist, not from above. Here are the three cases in side elevation against one shared rule — same scale, same datum, no retouching.
The step from Réf. 01 to Réf. 04 is 1.40 mm — about a credit card and a half. On a 17 cm wrist it is the difference between a cuff that closes and one that does not.
We hold five hides and buy a sixth only when the fifth runs out. Every strap is cut at 19 mm, skived to 3.4 mm at the lug and 2.1 mm at the tip, lined in goat, and stitched at six per centimetre by hand because a machine cannot keep the pitch through a taper.
You do not have to decide today. A deposit holds a slot on the 2027 list and the reference is fixed eight weeks before casing, by which point you will have handled all three.